Part Name

Screw - 3/8-16x1" Socket Head
Screw - #6-32x1-1/4" Round Head
Lockwasher - 1/4" Hi-Collar
Limit Switch, LS-4
Lockwasher = 5/16" Hi-Collar
Locknut - 1-8 Thr'd
Locknut, 5/16" - 18 Thr'd
Screw - 1/4-20x3/8: Socket Head
Lockwasher - 3/8" Hi-Collar
Thrust Washer
Lockwasher - #6
Screw - 1/4-20x1-1/4" Socket Head
Screw - 1/4"-20x2-1/4" Socket Head
Roll Pin - 3/16 dia. X 1-3/4" lg.
Roll Pin - 5/16" dia x 1½" lg.
Cam Foller Bearing - 1-3/4" O.D.
Dowel Pin - 5/16 dia x 21" lg.
Bearing w/Retaining Ring - 2.834" O.D. x 1.1811" I.D.
O-Ring - 2/1/8" O.D. x 1-3/4" I.D.
Drive Pin - 3/8" dia x 7/8" lg.
Shoulder Screw - 5/8" dia x 1-1/4"
Bearing Inner Race
Needle Bearing 2-1/8" O.D.
Spring
Screw ½-13x3-½" Socket Head
Shoulder Screw -3/4"dia x 1-½"
Thrust Washer
Pin - 1/4 dia x ½" lg. Groove Pin
Drive Pn - ½" dia x 2-1/2" lg.
Cam Foller Bearing - 1-½" O.D. x 7/16" I.D.
Roller Bearing - 2.834" O.D. x 1.378" I.D.
Ball Bearing - 2.44" O.D.
Jam Nut 5/8-11 Thr'd
Screw - 3/8" Hi-Collar
Needle Bearing - 1½" O.D. x 5/8" I.D.
Screw - 3/8-16x3-½" Socket Head
Drive Pin - 5/16 dia x 2" lg. Type "F"
Screw - ½-13x1-1/4" Socket Head
Retaining Ring
O-Ring - 1" O.D. x 3/4" I.D.
Locknut - 7/16-14 Thr'd
Locknut - ½-13 Thr'd
Lockwasher - 3/4" Split
1/4 Lockwasher
Lockwasher - 5/8" Split
Screw - 1/4-20x3/4" Socket Head
Locknut
Clotter Pin
Cotter Pin, 1/8x1-1/4" lg.
Roll Pin 3/16" dia x 11/16"lg.
Roll Pin, 1/4" dia x 3/4" lg.
Screw - 5/16-18x7/8" Socket Head
Locknut - 1/4-20 Thr'd
Screw - 1/4-20x3/4: Hex Head
Screw - Shoulder 3/8" dia x 3½"
Locknut - 3/8-16 Thr'd
Dowel Pin 1/4 dia x 7/8" lg.
Retianing Ring
Screw - 3/8-16 x 1-1/4" Socket Head
Roll Pin - 3/16 dia x 1-1/4" lg.
Scrw - #10-32x½ Headless Set Scr.
Screw, Special
Gripper Cylinder
Clevis Pin
Limit Switch, LS1-1-2
Screw - 5/16-18x1" Socket Head
Lockwasher - ½" Internal Tooth
Spring
Spring - LS4 Return Spring
Knotter Cylinder
Gripper Cylinder (Do not use -see note #1)
Bearing Spacer
Cutter Blade
Pivot Pin
Spacer
Shaft
Guide Finger
Bushing - Roller Arm
Cutter Lever Stud
Spacer Washer
Shaft
Rod - 3/8" O.D. x 3-15/16" lg.
Cutter Bushing
Segment Gear Bushing
Pin - ½" O.D. x 1-3/4: lg. (special)
Pin (Install in Item #6)
Shaft
Spacker
Yoke cover Assembly
Clevis
Wire Guide
Pinion Bushing
Rod
Spacker Block
Cam Shaft
Mounting Block
Clevis (Do not use)
Stud - Special ½" dia x 7½" lg.
Stop Lever Assembly
Gripper - 10 thru 12 Gauge
Gripper - Lever
Cutter Lever
Cylinder Suppert
Spacker - Knotter
Gear Segment Assembly
Roller Arm - L.H.
Shim - Washer
Cam Assmebly L.H. (inc. 12272 Bearing)
Cam Assembly R.H. (inc. 12272 Needle Bearing 1"O.D.)
Support Cylinder Mounting Plate (Do not use)
Side Plate - R.H.
Side Plate - L.H.
Roller Arm - R.H.
Gear - Segment
Gear Cover
Switch Mounting Plate
Stop Cover
Adapter
Yoke Gripper 11 and 11½ Gauge
Yoke Gripper 12 Gauge
Slotted Nut
Switch Lever
Spacer Gauge
Limit Switch Bracket Assembly (See Note #3)
Clevis
Lever
Cylinder Mounting Plate
Spacer
Spacer
Insert - 10 and 10½ Gauge
Yoke Cutter 10 and 10½ Gauge
Yoke Gripper 10 and 10½ Gauge
Twister Pinion - 10 and 10½ Gauge
Twister Pinion - 11 and 11½ Gauge
Yoke Cutter 11 and 11½ Gauge
Yoke Cutter 12 Gauge
Twister Pinion - 12 Gauge
Insert - 11 and 11½ Gauge
Insert - 12 Gauge
Screw, 1/4-20x1-3/4" lg.